home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
QRZ! Ham Radio 4
/
QRZ Ham Radio Callsign Database - Volume 4.iso
/
digests
/
infoham
/
940557.txt
< prev
next >
Wrap
Internet Message Format
|
1994-11-13
|
32KB
Date: Sun, 22 May 94 11:37:56 PDT
From: Info-Hams Mailing List and Newsgroup <info-hams@ucsd.edu>
Errors-To: Info-Hams-Errors@UCSD.Edu
Reply-To: Info-Hams@UCSD.Edu
Precedence: Bulk
Subject: Info-Hams Digest V94 #557
To: Info-Hams
Info-Hams Digest Sun, 22 May 94 Volume 94 : Issue 557
Today's Topics:
"for ID"
ANS-140 BULLETINS
Daily Summary of Solar Geophysical Activity for 21 May
FCC licensing delays (2 msgs)
Ham Radio few problems!
HTX-202 problem
QSL Route
repeater slang/lingo.
Send Replies or notes for publication to: <Info-Hams@UCSD.Edu>
Send subscription requests to: <Info-Hams-REQUEST@UCSD.Edu>
Problems you can't solve otherwise to brian@ucsd.edu.
Archives of past issues of the Info-Hams Digest are available
(by FTP only) from UCSD.Edu in directory "mailarchives/info-hams".
We trust that readers are intelligent enough to realize that all text
herein consists of personal comments and does not represent the official
policies or positions of any party. Your mileage may vary. So there.
----------------------------------------------------------------------
Date: 22 May 1994 17:49:36 GMT
From: ihnp4.ucsd.edu!swrinde!cs.utexas.edu!geraldo.cc.utexas.edu!astro.as.utexas.edu!oo7@network.ucsd.edu
Subject: "for ID"
To: info-hams@ucsd.edu
gary@ke4zv.atl.ga.us (Gary Coffman) says:
>if you're in a *large* roundtable, and 10 minutes has passed since
>your last ID, you might insert your callsign "for ID" at a pause.
>That tells everyone that you're not asking to break rotation, just
>stay legal.
Are you saying that even if you haven't transmitted a thing for
10 minutes, you still have to identify? If I finish a QSO, give
my callsign, the other guy says "bye" and I say "bye" (or "dit dit")
without an identification, do I have to make a special broadcast
within the next 10 minutes just to give my callsign? In the case
cited above, why isn't it enough to identify the next time you actually
make a transmission as part of the ongoing discussion?
Anyway, I hear this "for ID" thing at the start and end of monologues
on HF phone sometimes, which doesn't seem appropriate. Yesterday I
heard someone calling CQ DX on phone and then giving his callsign as
"Kilo Bravo Region Three ... ... ", which only seems to confuse
things (if I were straining to hear the call of a very weak station
and it seemed to have three letters before the number I think I would
be confused and probably give up).
And while I'm at it, what is the purpose of those CQ DX calls that
say "beaming the Pacific" - not "CQ Pacific", but "CQ DX, beaming
the Pacific"? Is this to indicate that you don't want to be called
by someone in Nepal? Or is it so that someone in the Pacific who
hears you only marginally won't respond because they know you can't
increase your signal any more by turning your beam? In either case,
it would seem to reduce the number of potential callers. Come to
think of it, most of the people who say they are beaming the whatever
rarely seem to get answers anyway.
It might make communications much easier if we just said what we
meant all the time, which means proper phonetics and procedures.
The cute stuff is OK when you know you are S9+, I suppose.
Derek Wills (AA5BT, G3NMX)
Department of Astronomy, University of Texas,
Austin TX 78712. (512-471-1392)
oo7@astro.as.utexas.edu
------------------------------
Date: 22 May 94 16:52:18 GMT
From: news-mail-gateway@ucsd.edu
Subject: ANS-140 BULLETINS
To: info-hams@ucsd.edu
SB SAT @ AMSAT $ANS-140.01
AMSAT-NA COMMENTS TO NTIA
HR AMSAT NEWS SERVICE BULLETIN 140.01 FROM AMSAT HQ
SILVER SPRING, MD MAY 21, 1994
TO ALL RADIO AMATEURS BT
BID: $ANS-140.01
AMSAT-NA Sends Comments To the National Telecomunications & Information
Administration (NTIA)
The Radio Amateur Satellite Corporation has responded to proposals con-
tained in a notice from the National Telecommunications and Information
Administration (NTIA). That notice, entitled Preliminary Spectrum Realloc-
ation Report, was released in February and was prepared pursuant to Title VI
of the Omnibus Budget Reconciliation Act of 1993. In that Act, Congress
mandated that the U.S. Government re-allocate to the private sector 200 MHz
of spectrum below 5 GHz, 100 MHz of it below 3 GHz. Since Amateur Radio's
use of the microwave bands is on a secondary basis to Government applica-
tions, mostly military, this proceeding could have a significant impact on
our future access to these frequencies.
In its comments filed May 11 by AMSAT-NA VP for Government Liaison Perry
Klein (W3PK), AMSAT-NA asked the NTIA for wider amateur and amateur-satell-
ite service bands at 13cm than proposed in its Preliminary Report. It pro-
posed that 2300 to 2310, 2390 to 2400 and 2402 to 2417 MHz be turned over
to FCC for allocation to commercial users. In omitting 2400 to 2402 MHz
from this re-allocation, NTIA noted amateur satellite use of this band.
This would presumably leave 2400 to 2402 and 2417 to 245 MHz available to
amateurs. The present 13cm amateur band consists of 2300-2310 and 2390-
2450 MHz.
AMSAT-NA proposed a primary amateur/amateur satellite allocation of
2400-2410 MHz plus access to as much of the 2410 to 2450 MHz band as
possible on a shared basis. In support of this request, AMSAT-NA cited the
likelihood of greatly increased demand for amateur satellite operations in
the 13 cm band in coming years, far more than can be accommodated within
2400-2402 MHz; the unsuitability of 2417-2450 MHz for amateur satellite
downlinks because of interference from such devices as microwave ovens; and
the need to coordinate amateur-satellite allocations internationally so
that they are available on a global basis. In addition, AMSAT-NA proposed
that a narrow band of 1-2 MHz, somewhere between 2300 and 2400 MHz, be
allocated to the amateur service on a primary basis to accommodate the
experimental weak-signal tropo and EME work now carried out around 2304
MHz.
AMSAT-NA comments were prepared by a group consisting of Perry Klein
(W3PK), Ray Soifer (W2RS), Jan King (W3GEY) and Bill Tynan (W3XO).
[The AMSAT News Service (ANS) would like to thank this group for the
material used in this bulletin.]
/EX
SB SAT @ AMSAT $ANS-140.02
LO-19 & IO-26 OBC'S CRASH
HR AMSAT NEWS SERVICE BULLETIN 140.02 FROM AMSAT HQ
SILVER SPRING, MD MAY 21, 1994
TO ALL RADIO AMATEURS BT
BID: $ANS-140.02
LO-19's & IO-26's On-board Computers Crash After A Single Event Upset (SEU)
It has been reported this week that LUSAT-OSCAR-19's On-Board Computer
(OBC) had "crashed" after having experienced what is known in the aerospace
industry as a Single Event Upset (SEU). This phenomenon is caused by high
energy particles in space "effecting" changes in the "state" inside of
memory chips and/or other electronic components. In simple terms, an SEU
will change a bit from a "1" to a "0" or visa-versa in Random Access Memory
(RAM) chips. All MICROSATs have software specifically desgined to handle
this problem. However, this software is not "bullet-proof." The software
can only correct one "state" change at a time. If two "state" changes
occur simultaneously, there is a good possibility that they will occur in
RAM memory locations that will eventually lead to an OBC "crash."
The problem with LO-19 was first noticed on 16-MAY-94 over Argentina when
LU1JBR was working it then he noticed suddenly that the satellite simply
"disappeared." On the evening of 17-MAY-94, LO-19's ground command
station, operated by Norberto Pennini (LU8DYF) was able to successfully
reset the OBC. AMSAT-LU ground station LU8DYF requests that all users of
LO-19 to PLEASE REFRAIN FROM USING IT FOR SEVERAL WEEKS! The reloading
of the software will take several weeks along with extensive tests to be
performed to insure all is working properly. AMSAT-LU requests that if
anyone was collecting telemetry between 17-MAY-94 at 02:00 UTC until
18-MAY-94 around 02:00 UTC that they please forward it to the following
addresses: via packet radio to LU8DYF @ LU8DYF.BA.ARG.SOAM and/or LU8DYF @
ON ANY ACTIVE SATELLITE, or via Internet to: lu8dyf@asarin.org.ar. This
will certainly assist in the recovery efforts by helping the AMSAT-LU group
understand this crash. All users are asked to please be patient as the
AMSAT-LU ground command team reloads the operating system software for
LO-19.
Alberto Zagni (I2KBD) also reports that the the same high energy eruption
that caused the LO-19's OBC to "crash" has also cause IO-26's OBC to "crash."
I2KBD reports that the problem occured about the same time period and
feels that this was due to the fact the Sun was spewing out alot of highly
charged particles. I2KBD says that it will take several days to get the
"kernal" and Integrated Housekeeping Tasks (IHT) software reloaded. He
too asks that all IO-26 users to please be patient as they bring IO-26 back
"on-line."
Please stay tunned to the AMSAT News Service (ANS) bulletins for further
status on the reloading and recovery of LO-19 and IO-26.
[The AMSAT News Service (ANS) would like to thank LU2DTZ, LU8DYF, and
I2KBD for the information which went into this bulletin item.]
/EX
SB SAT @ AMSAT $ANS-140.03
WEEKLY OSCAR STATUS REPORTS
HR AMSAT NEWS SERVICE BULLETIN 140.03 FROM AMSAT HQ
SILVER SPRING, MD MAY 21, 1994
TO ALL RADIO AMATEURS BT
BID: $ANS-140.03
Weekly OSCAR Status Reports: 21-MAY-94
AO-13: Current Transponder Operating Schedule:
L QST *** AO-13 TRANSPONDER SCHEDULE *** 1994 May 07-Jul 11
Mode-B : MA 0 to MA 170 |
Mode-BS : MA 170 to MA 218 |
Mode-S : MA 218 to MA 220 |<- S beacon only
Mode-S : MA 220 to MA 230 |<- S transponder; B trsp. is OFF
Mode-BS : MA 230 to MA 250 | Alon/Alat 230/-5
Mode-B : MA 250 to MA 256 |
Omnis : MA 250 to MA 120 | Move to attitude 180/0, Jul 11
[G3RUH/DB2OS/VK5AGR]
FO-20: The analog mode will be continued indefinitely.
[Kazu Sakamoto (JJ1WTK) qga02014@niftyserve.or.jp]
KO-25: Please note that the KO-25 uplink was switched back to 145.980 MHz
on about 10-May-94. [K6OYY]
AO-16: Working well. [WH6I]
LO-19: DON'T USE LO-19 UNTIL FURTHER NOTICE! [LW2DTZ]
IO-26: IO-26 has sustained a SEU and users are asked to refrain from trying
to use it. [I2KBD]
KO-23: Operating Normally. [WH6I]
IO-26: Operating normally. [WH6I]
The AMSAT NEWS Service (ANS) is looking for volunteers to contribute weekly
OSCAR status reports. If you have a favorite OSCAR which you work on a
regular basis and would like to contribute to this bulletin, please send
your observations to WD0HHU at his CompuServe address of 70524,2272, on
INTERNET at wd0hhu@amsat.org, or to his local packet BBS in the Denver, CO
area, WD0HHU @ W0LJF.#NECO.CO.USA.NOAM. Also, if you find that the current
set of orbital elements are not generating the correct AOS/LOS times at
your QTH, PLEASE INCLUDE THAT INFORMATION AS WELL. The information you
provide will be of value to all OSCAR enthusiasts.
/EX
------------------------------
Date: Sun, 22 May 1994 01:04:25 MDT
From: ihnp4.ucsd.edu!usc!math.ohio-state.edu!cyber2.cyberstore.ca!nntp.cs.ubc.ca!alberta!ve6mgs!usenet@network.ucsd.edu
Subject: Daily Summary of Solar Geophysical Activity for 21 May
To: info-hams@ucsd.edu
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
DAILY SUMMARY OF SOLAR GEOPHYSICAL ACTIVITY
21 MAY, 1994
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
(Based In-Part On SESC Observational Data)
SOLAR AND GEOPHYSICAL ACTIVITY INDICES FOR 21 MAY, 1994
-------------------------------------------------------
!!BEGIN!! (1.0) S.T.D. Solar Geophysical Data Broadcast for DAY 141, 05/21/94
10.7 FLUX=087.7 90-AVG=086 SSN=035 BKI=1012 2322 BAI=006
BGND-XRAY=A4.0 FLU1=8.6E+05 FLU10=1.3E+04 PKI=2212 2222 PAI=007
BOU-DEV=006,004,006,010,018,024,016,010 DEV-AVG=011 NT SWF=00:000
XRAY-MAX= B3.3 @ 1332UT XRAY-MIN= A3.7 @ 1204UT XRAY-AVG= A7.2
NEUTN-MAX= +003% @ 1750UT NEUTN-MIN= -002% @ 1810UT NEUTN-AVG= +0.6%
PCA-MAX= +0.2DB @ 1550UT PCA-MIN= -0.3DB @ 2325UT PCA-AVG= -0.0DB
BOUTF-MAX=55327NT @ 2359UT BOUTF-MIN=55290NT @ 1702UT BOUTF-AVG=55313NT
GOES7-MAX=P:+000NT@ 0000UT GOES7-MIN=N:+000NT@ 0000UT G7-AVG=+087,+000,+000
GOES6-MAX=P:+133NT@ 1759UT GOES6-MIN=N:-061NT@ 0308UT G6-AVG=+113,+029,-029
FLUXFCST=STD:085,085,085;SESC:N/A,N/A,N/A BAI/PAI-FCST=005,005,010/010,010,012
KFCST=1233 2322 1232 3232 27DAY-AP=008,007 27DAY-KP=2233 2212 2221 1223
WARNINGS=
ALERTS=
!!END-DATA!!
NOTE: The Effective Sunspot Number for 20 MAY 94 was 29.4.
The Full Kp Indices for 20 MAY 94 are: 2- 3o 2+ 2- 2+ 3- 2+ 2-
The 3-Hr Ap Indices for 20 MAY 94 are: 7 15 10 6 9 12 9 7
Greater than 2 MeV Electron Fluence for 21 MAY is: 1.3E+09
SYNOPSIS OF ACTIVITY
--------------------
Solar activity continued at a very low level. Only minor
evolution occurred in the two spotted regions. A moderate size
coronal hole is visible in the northwest quadrant. This hole is
larger than last rotation.
Solar activity forecast: solar activity should be at
a very low level for the forecast period. Region 7722 (N09W54)
poses a slight threat of a C-class flare.
The geomagnetic field was predominantly quiet for the period.
Energetic electron fluxes were at a moderate to high level.
Geophysical activity forecast: the geomagnetic field
should be quiet to slightly unsettled through 23 May.
Mostly unsettled to slightly active levels are forecast on
24 May in response to the coronal hole mentioned above.
Event probabilities 22 may-24 may
Class M 01/01/01
Class X 01/01/01
Proton 01/01/01
PCAF Green
Geomagnetic activity probabilities 22 may-24 may
A. Middle Latitudes
Active 20/20/30
Minor Storm 05/05/10
Major-Severe Storm 01/01/05
B. High Latitudes
Active 20/25/30
Minor Storm 05/05/15
Major-Severe Storm 01/01/05
HF propagation conditions were normal over all regions.
No changes are expected over the next 3 days, through 24 May
inclusive. Normal conditions should persist.
COPIES OF JOINT USAF/NOAA SESC SOLAR GEOPHYSICAL REPORTS
========================================================
REGIONS WITH SUNSPOTS. LOCATIONS VALID AT 21/2400Z MAY
------------------------------------------------------
NMBR LOCATION LO AREA Z LL NN MAG TYPE
7722 N09W55 122 0340 CKO 06 006 BETA
7727 N08E14 053 0050 DSO 06 009 BETA
7725 N04W74 141 PLAGE
7726 N09W40 107 PLAGE
REGIONS DUE TO RETURN 22 MAY TO 24 MAY
NMBR LAT LO
NONE
LISTING OF SOLAR ENERGETIC EVENTS FOR 21 MAY, 1994
--------------------------------------------------
BEGIN MAX END RGN LOC XRAY OP 245MHZ 10CM SWEEP SWF
NO EVENTS OBSERVED
POSSIBLE CORONAL MASS EJECTION EVENTS FOR 21 MAY, 1994
------------------------------------------------------
BEGIN MAX END LOCATION TYPE SIZE DUR II IV
NO EVENTS OBSERVED
INFERRED CORONAL HOLES. LOCATIONS VALID AT 21/2400Z
---------------------------------------------------
ISOLATED HOLES AND POLAR EXTENSIONS
EAST SOUTH WEST NORTH CAR TYPE POL AREA OBSN
82 N32W08 N02W09 N08W37 N32W08 082 ISO POS 010 10830A
83 S37E86 S37E86 S10E36 S08E41 008 ISO NEG 015 10830A
SUMMARY OF FLARE EVENTS FOR THE PREVIOUS UTC DAY
------------------------------------------------
Date Begin Max End Xray Op Region Locn 2695 MHz 8800 MHz 15.4 GHz
------ ---- ---- ---- ---- -- ------ ------ --------- --------- ---------
20 May: 0248 0253 0259 B2.5
1453 1456 1509 SF 7723 N10W71
1622 1627 1629 B2.6 SF 7727 N07E32
REGION FLARE STATISTICS FOR THE PREVIOUS UTC DAY
------------------------------------------------
C M X S 1 2 3 4 Total (%)
-- -- -- -- -- -- -- -- --- ------
Region 7723: 0 0 0 1 0 0 0 0 001 (33.3)
Region 7727: 0 0 0 1 0 0 0 0 001 (33.3)
Uncorrellated: 0 0 0 0 0 0 0 0 001 (33.3)
Total Events: 003 optical and x-ray.
EVENTS WITH SWEEPS AND/OR OPTICAL PHENOMENA FOR THE LAST UTC DAY
----------------------------------------------------------------
Date Begin Max End Xray Op Region Locn Sweeps/Optical Observations
------ ---- ---- ---- ---- -- ------ ------ ---------------------------
NO EVENTS OBSERVED.
NOTES:
All times are in Universal Time (UT). Characters preceding begin, max,
and end times are defined as: B = Before, U = Uncertain, A = After.
All times associated with x-ray flares (ex. flares which produce
associated x-ray bursts) refer to the begin, max, and end times of the
x-rays. Flares which are not associated with x-ray signatures use the
optical observations to determine the begin, max, and end times.
Acronyms used to identify sweeps and optical phenomena include:
II = Type II Sweep Frequency Event
III = Type III Sweep
IV = Type IV Sweep
V = Type V Sweep
Continuum = Continuum Radio Event
Loop = Loop Prominence System,
Spray = Limb Spray,
Surge = Bright Limb Surge,
EPL = Eruptive Prominence on the Limb.
** End of Daily Report **
------------------------------
Date: Sat, 21 May 94 16:04:00 -0800
From: ihnp4.ucsd.edu!usc!elroy.jpl.nasa.gov!netline-fddi.jpl.nasa.gov!nntp-server.caltech.edu!news.claremont.edu!kaiwan.com!ledge!darryl.linkow@network.ucsd.edu
Subject: FCC licensing delays
To: info-hams@ucsd.edu
Hello all! I have now been waiting for 7 weeks for my first
license to arrive in the mail. Having read all the horror stories
on the nets regarding waiting times, I decided to call the FCC in
Gettysburg and find out what the REAL problem is myself. I spoke
to a very nice woman who told me that it is now taking from 12 to
14 weeks to process application forms because there is only ONE PERSON
keying in the information to the computer. Also, she said that
the "new computer" that people have talked about on the nets is not
online yet. (Hmm...it only took me a couple of hours to set up my
latest 486 box!). At any rate, this ONE PERSON evidently has
thousands of licenses to process. The woman told me that she had
not heard of any offers from the ARRL regarding local volunteers in
the Gettysburg area coming in to help out with the backlog and
enter data into the computer. I told her that since we have
volunteers doing license testing, at no charge to the Federal
government via the VEC program, it seems that we could have
volunteer personnel to perform data entry! She also told me that
the Gettysburg office has requested additional help several times from the
Managing Director of the FCC in Washington, D.C., but the man
refuses to give them any more employees, for even a short period of
time, to clear up the backlog of license applications. I have
called my local Congressman, Representative Anthony Beilenson, and
told one of his staff about the problem. I asked if the
Congressman could contact the Managing Director and ask for some
additional staffing in Gettysburg, at least on a temporary basis,
to get the backlog of amateur radio applications (Form 610)
processed. Perhaps if everyone told their respective Congressman
about the problem, we could get some help! Here is the name,
address, and phone number of the FCC Managing Director who will not
let Gettysburg have any additional people to help get rid of the
backlog: Andrew Fishel
Managing Director
FCC
1919 M Street, N.W.
Washington, DC
(202) 632-6390
Just as an aside, I decided to get my amateur license because of
the problems associated with the January 17 earthquake here. The
American Red Cross had a severe shortage of qualified amateur radio
operators to handle emergency traffic after the earthquake. So, I
decided, as a citizen of the community, that I would get my
license, so that I might get involved in disaster communications,
and be ready to assist, if needed. But, as of right now, I can not
participate in any emergency networks until my license arrives!!
Also, I am routing a copy of the above information to President
Clinton and Vice President Gore. I understand that Vice President
Gore is very interested in information processing and bottlenecks
in those areas of the government that are having problems
processing data.
I am open to discussing this with anyone on the net, but if you
want to work for the improvement of this problem, please call or
write to Mr. Fishel and your elected federal government officials
in Congress and The White House.
Sincerely,
Darryl Linkow (no callsign after 7 weeks and don't expect to see
one for another 5 to 7 weeks!)
---
│ OLX 2.2 │ Darryl Linkow (818)346-5278 9 am - 5 pm PDT
------------------------------
Date: 22 May 1994 11:47:04 GMT
From: ihnp4.ucsd.edu!swrinde!gatech!usenet.ins.cwru.edu!po.cwru.edu!sct@network.ucsd.edu
Subject: FCC licensing delays
To: info-hams@ucsd.edu
At least it isn't like The Bad Old Days, when the _exams_ were only
once every three months. :-)
The FCC took 12 weeks to get me my last license. They have in recent
memory been as fast as 7 weeks, but that didn't last long. It takes
time, and one should simply accept that and be patient. Use the time
to buy a copy of the ARRL Handbook or Operating Guide and read it, or
buy a receiver and start working on your Morse Code. Just think of
the boasting power you will have if you can upgrade to General or Advanced
before your first license arrives!
In other words, yes, it's a bother to wait, but don't sweat it. The wait
is not known to be fatal. If you want to get involved in ham radio Right
Now (and what new ham doesn't want that?), buy books and read them and buy
a receiver and listen. You'll learn a lot and be much more ready to start
participating when that license arrives.
Because this has zilch to do with homebrewing, please send any followups
to rec.radio.amateur.misc. Thanks.
Stephen
--
Stephen Trier
sct@po.cwru.edu
KG8IF
------------------------------
Date: Sun, 22 May 1994 14:55:49 GMT
From: ihnp4.ucsd.edu!swrinde!sgiblab!brunix!pstc3.pstc.brown.edu!md@network.ucsd.edu
Subject: Ham Radio few problems!
To: info-hams@ucsd.edu
bal@ccd.harris.com (Bruce Lifter) writes:
> I think you are over generalizing a bit. The no-code technician license
> has brought a wealth of future amateur operators.
Quantity before quality. The legacy of the no-code tech license.
> In my opinion, the 2
> meter band has become sort of a novice testing ground. Some stay as no-code
> techs, others fall by the way side and drop out of the hobby, while
> yet others realize that there is more to ham radio than rag chewing on
> a repeater.
I don't deny this. Usually, most people in this area move off of 2 meters
because of the cesspool it is becoming.
> Stating that your problems have been with CBers coming into the hobby is
> taking the easy way out. At one time, I would guess that 50% of the adult
> population in the United States owned a CB (my guess only).
A few weeks ago, a new no-code tech came on to the largest 2 meter
repeater in the state, and started talking about how much he loved ham
radio, and now he has his 2 meter radio next to his CB in the truck. He
asked if anyone on the channel wanted a smokey report.
Its not a question of whether or not someone used a CB radio before in
their lifetime. Most hams today have probably had some form of experience
with CB radio. That's not the point. The point is whether or not someone
comes into the ham hobby after being indoctrinated into the CB radio
culture and brings all of his/her habits/ethics/morals with him/her.
The "yahoo" who I spoke of two paragraphs ago was one such example.
However, much to his credit, he spent a great deal of time listening and
learning from other ham operators. Today, he has improved his operating
practices dramatically, and for that, I give him credit.
> I think the
> real problem is that we are overloading the front end. The VHF repeaters
> are becoming congested.
And now the equipment manufacturers, tired of small profits from selling
VHF/UHF equipment, are looking to get the code requirement dropped to 10wpm
so more people can get HF voice privs and buy their higher-margin radios.
MD
--
-- Michael P. Deignan
-- Amalgamated Baby Seal Poachers Union, Local 101
-- "Get 'The Club'... Endorsed by Baby Seal poachers everywhere..."
------------------------------
Date: Sun, 22 May 1994 16:42:32 GMT
From: ihnp4.ucsd.edu!library.ucla.edu!news.ucdavis.edu!chip.ucdavis.edu!ez006683@network.ucsd.edu
Subject: HTX-202 problem
To: info-hams@ucsd.edu
JDuffy (jduffy@aol.com) wrote:
: In article <940516161823@emerald.nist.gov>, proctor@news-reader.nist.gov
: (James Proctor) writes:
: Problem with Radio Shack HT turning on in the middle of a QSO when the power
: saving feature is enabled.
: What can I say, it is something sold by Radio Shark. Did you really expect
: quality?
Remember all the stuff about rudeness to posters from certain sites? I
think that kind of generalization should be avoided on both sides.
Dan
--
*---------------------------------------------------------------------*
* Daniel D. Todd Packet: KC6UUD@KE6LW.#nocal.ca.usa *
* Internet: ddtodd@ucdavis.edu *
* Snail Mail: 1750 Hanover #102 *
* Davis CA 95616 *
*---------------------------------------------------------------------*
* All opinions expressed herein are completely ficticious any *
* resemblence to actual opinions of persons living or dead is *
* completely coincidental. *
*---------------------------------------------------------------------*
------------------------------
Date: 22 May 1994 12:37:22 GMT
From: ihnp4.ucsd.edu!swrinde!cs.utexas.edu!convex!news.duke.edu!acpub.duke.edu!thomasr@network.ucsd.edu
Subject: QSL Route
To: info-hams@ucsd.edu
I still have not received my international callsign directory. Would
somebody kindly give me the QSL address for CX1AA in Uraguay?
Thanks,
Ron Thomas
thomasr@acpub.duke.edu
------------------------------
Date: Sun, 22 May 1994 14:43:42 GMT
From: ihnp4.ucsd.edu!swrinde!sgiblab!brunix!pstc3.pstc.brown.edu!md@network.ucsd.edu
Subject: repeater slang/lingo.
To: info-hams@ucsd.edu
gary@ke4zv.atl.ga.us (Gary Coffman) writes:
> So, if you're in a
> *large* roundtable, and 10 minutes has passed since your last ID, you might
> insert your callsign "for ID" at a pause. That tells everyone that you're
> not asking to break rotation, just stay legal.
Unfortunately, most of the time I hear "for ID" is when two people are
chatting with one another. Clearly in this case its redundant, since why
else would you be giving your callsign if you're in the middle of a
conversation with someone?
MD
--
-- Michael P. Deignan
-- Amalgamated Baby Seal Poachers Union, Local 101
-- "Get 'The Club'... Endorsed by Baby Seal poachers everywhere..."
------------------------------
Date: Sun, 22 May 1994 12:36:11 GMT
From: ihnp4.ucsd.edu!swrinde!emory!kd4nc!ke4zv!gary@network.ucsd.edu
To: info-hams@ucsd.edu
References <CpwIu8.D3v@ryn.mro.dec.com>, <np2xCpx8n7.7oL@netcom.com>, <1994May19.172626.1314@tellab5.tellabs.com>
Reply-To : gary@ke4zv.atl.ga.us (Gary Coffman)
Subject : Re: repeater slang/lingo.
In article <1994May19.172626.1314@tellab5.tellabs.com> jwa@tellabs.com (John Albert) writes:
>The thing that turns my crank is when someone identifies themself
>by giving their call and then they say "for I D ".
>
>Of course! that's what their doing isn't it?
In that case, yes, however there are other reasons to say your callsign.
It's the standard way to join most repeater conversations, just insert
your callsign in a pause. It's also a common way to insert an out of rotation
comment, insert callsign, then wait to be recognized. So, if you're in a
*large* roundtable, and 10 minutes has passed since your last ID, you might
insert your callsign "for ID" at a pause. That tells everyone that you're
not asking to break rotation, just stay legal.
On my repeater, we don't honor rotation, but we often do have stations
riding along silently for periods in excess of 10 minutes while the
conversation rages. So they may insert their callsign "for ID" in a pause
for the same reason as in a roundtable.
>Why do they have to be redundant? I never heard this proceedure
>used in the 60's. Is this something that was carried over from
>the "Chicken Band" when they where required to use a call?
I heard it frequently in the 60s, but never on CB. Different areas
have different repeater operating habits. "For ID" is one that's
been widespread around here for a very long time, and for reason.
On the other hand, calling "break" on local repeaters will get you
heckled unmercifully.
>When ever I here some one do it I ask if they operated a CB
>radio before they where a Ham and usually the answer is yes.
Ask anyone licensed since the mid-70s if they operated CB and
the answer is likely yes. I even bought a CB in the seventies,
though I'd been a ham since the early 60s. CB has it's uses.
Gary
--
Gary Coffman KE4ZV | You make it, | gatech!wa4mei!ke4zv!gary
Destructive Testing Systems | we break it. | uunet!rsiatl!ke4zv!gary
534 Shannon Way | Guaranteed! | emory!kd4nc!ke4zv!gary
Lawrenceville, GA 30244 | |
------------------------------
End of Info-Hams Digest V94 #557
******************************